Environment.usetqdm module

Import tqdm from tqdm, safely.

class Environment.usetqdm.tqdm(iterable=None, desc=None, total=None, leave=True, file=None, ncols=None, mininterval=0.1, maxinterval=10.0, miniters=None, ascii=None, disable=False, unit='it', unit_scale=False, dynamic_ncols=False, smoothing=0.3, bar_format=None, initial=0, position=None, postfix=None, unit_divisor=1000, write_bytes=None, gui=False, **kwargs)[source]

Bases: tqdm.utils.Comparable

Decorate an iterable object, returning an iterator which acts exactly like the original iterable, but prints a dynamically updating progressbar every time a value is requested.

monitor_interval = 10
monitor = None
static format_sizeof(num, suffix='', divisor=1000)[source]

Formats a number (greater than unity) with SI Order of Magnitude prefixes.

numfloat

Number ( >= 1) to format.

suffixstr, optional

Post-postfix [default: ‘’].

divisorfloat, optional

Divisor between prefixes [default: 1000].

outstr

Number with Order of Magnitude SI unit postfix.

static format_interval(t)[source]

Formats a number of seconds as a clock time, [H:]MM:SS

tint

Number of seconds.

outstr

[H:]MM:SS

static format_num(n)[source]

Intelligent scientific notation (.3g).

nint or float or Numeric

A Number.

outstr

Formatted number.

static ema(x, mu=None, alpha=0.3)[source]

Exponential moving average: smoothing to give progressively lower weights to older values.

xfloat

New value to include in EMA.

mufloat, optional

Previous EMA value.

alphafloat, optional

Smoothing factor in range [0, 1], [default: 0.3]. Increase to give more weight to recent values. Ranges from 0 (yields mu) to 1 (yields x).

static status_printer(file)[source]

Manage the printing and in-place updating of a line of characters. Note that if the string is longer than a line, then in-place updating may not work (it will print a new line at each refresh).

static format_meter(n, total, elapsed, ncols=None, prefix='', ascii=False, unit='it', unit_scale=False, rate=None, bar_format=None, postfix=None, unit_divisor=1000, **extra_kwargs)[source]

Return a string-based progress bar given some parameters

nint

Number of finished iterations.

totalint

The expected total number of iterations. If meaningless (), only basic progress statistics are displayed (no ETA).

elapsedfloat

Number of seconds passed since start.

ncolsint, optional

The width of the entire output message. If specified, dynamically resizes {bar} to stay within this bound [default: None]. If 0, will not print any bar (only stats). The fallback is {bar:10}.

prefixstr, optional

Prefix message (included in total width) [default: ‘’]. Use as {desc} in bar_format string.

asciibool, optional or str, optional

If not set, use unicode (smooth blocks) to fill the meter [default: False]. The fallback is to use ASCII characters ” 123456789#”.

unitstr, optional

The iteration unit [default: ‘it’].

unit_scalebool or int or float, optional

If 1 or True, the number of iterations will be printed with an appropriate SI metric prefix (k = 10^3, M = 10^6, etc.) [default: False]. If any other non-zero number, will scale total and n.

ratefloat, optional

Manual override for iteration rate. If [default: None], uses n/elapsed.

bar_formatstr, optional

Specify a custom bar string formatting. May impact performance. [default: ‘{l_bar}{bar}{r_bar}’], where l_bar=’{desc}: {percentage:3.0f}%|’ and r_bar=’| {n_fmt}/{total_fmt} [{elapsed}<{remaining}, ‘

‘{rate_fmt}{postfix}]’

Possible vars: l_bar, bar, r_bar, n, n_fmt, total, total_fmt,

percentage, elapsed, elapsed_s, ncols, desc, unit, rate, rate_fmt, rate_noinv, rate_noinv_fmt, rate_inv, rate_inv_fmt, postfix, unit_divisor, remaining, remaining_s.

Note that a trailing “: ” is automatically removed after {desc} if the latter is empty.

postfix*, optional

Similar to prefix, but placed at the end (e.g. for additional stats). Note: postfix is usually a string (not a dict) for this method, and will if possible be set to postfix = ‘, ‘ + postfix. However other types are supported (#382).

unit_divisorfloat, optional

[default: 1000], ignored unless unit_scale is True.

out : Formatted meter and stats, ready to display.

static __new__(cls, *args, **kwargs)[source]

Create and return a new object. See help(type) for accurate signature.

classmethod _get_free_pos(instance=None)[source]

Skips specified instance.

classmethod _decr_instances(instance)[source]

Remove from list and reposition other bars so that newer bars won’t overlap previous bars

classmethod write(s, file=None, end='\n', nolock=False)[source]

Print a message via tqdm (without overlap with bars).

classmethod external_write_mode(file=None, nolock=False)[source]

Disable tqdm within context and refresh tqdm when exits. Useful when writing to standard output stream

classmethod set_lock(lock)[source]

Set the global lock.

classmethod get_lock()[source]

Get the global lock. Construct it if it does not exist.

classmethod pandas(*targs, **tkwargs)[source]
Registers the given tqdm class with

pandas.core. ( frame.DataFrame | series.Series | groupby.(generic.)DataFrameGroupBy | groupby.(generic.)SeriesGroupBy ).progress_apply

A new instance will be create every time progress_apply is called, and each instance will automatically close() upon completion.

targs, tkwargs : arguments for the tqdm instance

>>> import pandas as pd
>>> import numpy as np
>>> from tqdm import tqdm
>>> from tqdm.gui import tqdm as tqdm_gui
>>>
>>> df = pd.DataFrame(np.random.randint(0, 100, (100000, 6)))
>>> tqdm.pandas(ncols=50)  # can use tqdm_gui, optional kwargs, etc
>>> # Now you can use `progress_apply` instead of `apply`
>>> df.groupby(0).progress_apply(lambda x: x**2)

https://stackoverflow.com/questions/18603270/ progress-indicator-during-pandas-operations-python

__init__(iterable=None, desc=None, total=None, leave=True, file=None, ncols=None, mininterval=0.1, maxinterval=10.0, miniters=None, ascii=None, disable=False, unit='it', unit_scale=False, dynamic_ncols=False, smoothing=0.3, bar_format=None, initial=0, position=None, postfix=None, unit_divisor=1000, write_bytes=None, gui=False, **kwargs)[source]
iterableiterable, optional

Iterable to decorate with a progressbar. Leave blank to manually manage the updates.

descstr, optional

Prefix for the progressbar.

totalint, optional

The number of expected iterations. If unspecified, len(iterable) is used if possible. If float(“inf”) or as a last resort, only basic progress statistics are displayed (no ETA, no progressbar). If gui is True and this parameter needs subsequent updating, specify an initial arbitrary large positive integer, e.g. int(9e9).

leavebool, optional

If [default: True], keeps all traces of the progressbar upon termination of iteration. If None, will leave only if position is 0.

fileio.TextIOWrapper or io.StringIO, optional

Specifies where to output the progress messages (default: sys.stderr). Uses file.write(str) and file.flush() methods. For encoding, see write_bytes.

ncolsint, optional

The width of the entire output message. If specified, dynamically resizes the progressbar to stay within this bound. If unspecified, attempts to use environment width. The fallback is a meter width of 10 and no limit for the counter and statistics. If 0, will not print any meter (only stats).

minintervalfloat, optional

Minimum progress display update interval [default: 0.1] seconds.

maxintervalfloat, optional

Maximum progress display update interval [default: 10] seconds. Automatically adjusts miniters to correspond to mininterval after long display update lag. Only works if dynamic_miniters or monitor thread is enabled.

minitersint, optional

Minimum progress display update interval, in iterations. If 0 and dynamic_miniters, will automatically adjust to equal mininterval (more CPU efficient, good for tight loops). If > 0, will skip display of specified number of iterations. Tweak this and mininterval to get very efficient loops. If your progress is erratic with both fast and slow iterations (network, skipping items, etc) you should set miniters=1.

asciibool or str, optional

If unspecified or False, use unicode (smooth blocks) to fill the meter. The fallback is to use ASCII characters ” 123456789#”.

disablebool, optional

Whether to disable the entire progressbar wrapper [default: False]. If set to None, disable on non-TTY.

unitstr, optional

String that will be used to define the unit of each iteration [default: it].

unit_scalebool or int or float, optional

If 1 or True, the number of iterations will be reduced/scaled automatically and a metric prefix following the International System of Units standard will be added (kilo, mega, etc.) [default: False]. If any other non-zero number, will scale total and n.

dynamic_ncolsbool, optional

If set, constantly alters ncols to the environment (allowing for window resizes) [default: False].

smoothingfloat, optional

Exponential moving average smoothing factor for speed estimates (ignored in GUI mode). Ranges from 0 (average speed) to 1 (current/instantaneous speed) [default: 0.3].

bar_formatstr, optional

Specify a custom bar string formatting. May impact performance. [default: ‘{l_bar}{bar}{r_bar}’], where l_bar=’{desc}: {percentage:3.0f}%|’ and r_bar=’| {n_fmt}/{total_fmt} [{elapsed}<{remaining}, ‘

‘{rate_fmt}{postfix}]’

Possible vars: l_bar, bar, r_bar, n, n_fmt, total, total_fmt,

percentage, elapsed, elapsed_s, ncols, desc, unit, rate, rate_fmt, rate_noinv, rate_noinv_fmt, rate_inv, rate_inv_fmt, postfix, unit_divisor, remaining, remaining_s.

Note that a trailing “: ” is automatically removed after {desc} if the latter is empty.

initialint, optional

The initial counter value. Useful when restarting a progress bar [default: 0].

positionint, optional

Specify the line offset to print this bar (starting from 0) Automatic if unspecified. Useful to manage multiple bars at once (eg, from threads).

postfixdict or *, optional

Specify additional stats to display at the end of the bar. Calls set_postfix(**postfix) if possible (dict).

unit_divisorfloat, optional

[default: 1000], ignored unless unit_scale is True.

write_bytesbool, optional

If (default: None) and file is unspecified, bytes will be written in Python 2. If True will also write bytes. In all other cases will default to unicode.

guibool, optional

WARNING: internal parameter - do not use. Use tqdm.gui.tqdm(…) instead. If set, will attempt to use matplotlib animations for a graphical output [default: False].

out : decorated iterator.

__bool__()[source]
__nonzero__()[source]
__len__()[source]
__enter__()[source]
__exit__(exc_type, exc_value, traceback)[source]
__del__()[source]
__repr__()[source]

Return repr(self).

property _comparable
__hash__()[source]

Return hash(self).

__iter__()[source]

Backward-compatibility to use: for x in tqdm(iterable)

update(n=1)[source]

Manually update the progress bar, useful for streams such as reading files. E.g.: >>> t = tqdm(total=filesize) # Initialise >>> for current_buffer in stream: … … … t.update(len(current_buffer)) >>> t.close() The last line is highly recommended, but possibly not necessary if t.update() will be called in such a way that filesize will be exactly reached and printed.

nint, optional

Increment to add to the internal counter of iterations [default: 1].

close()[source]

Cleanup and (if leave=False) close the progressbar.

clear(nolock=False)[source]

Clear current bar display.

refresh(nolock=False)[source]

Force refresh the display of this bar.

unpause()[source]

Restart tqdm timer from last print time.

reset(total=None)[source]

Resets to 0 iterations for repeated use.

Consider combining with leave=True.

total : int, optional. Total to use for the new bar.

__module__ = 'tqdm.std'
set_description(desc=None, refresh=True)[source]

Set/modify description of the progress bar.

desc : str, optional refresh : bool, optional

Forces refresh [default: True].

set_description_str(desc=None, refresh=True)[source]

Set/modify description without ‘: ‘ appended.

set_postfix(ordered_dict=None, refresh=True, **kwargs)[source]

Set/modify postfix (additional stats) with automatic formatting based on datatype.

ordered_dict : dict or OrderedDict, optional refresh : bool, optional

Forces refresh [default: True].

kwargs : dict, optional

set_postfix_str(s='', refresh=True)[source]

Postfix without dictionary expansion, similar to prefix handling.

moveto(n)[source]
property format_dict

Public API for read-only member access.

display(msg=None, pos=None)[source]

Use self.sp to display msg in the specified pos.

Consider overloading this function when inheriting to use e.g.: self.some_frontend(**self.format_dict) instead of self.sp.

msg : str, optional. What to display (default: repr(self)). pos : int, optional. Position to moveto

(default: abs(self.pos)).